ASTM D1746-2015 塑料薄板透明度试验方法 　　

　　ASTM D1746-2015

　　中文名称：塑料薄板透明度试验方法

　　英文名称：Standard Test Method for Transparency of Plastic Sheeting

　　原文名称：Standard Test Method for Transparency of Plastic Sheeting

　　范 围：The attribute of clarity of a sheet, measured by its ability to transmit image-forming light, correlates with its regular transmittance. Sensitivity to differences improves with decreasing incident beam- and receptor-angle. If the angular width of the incident beam and of the receptor aperture (as seen from the specimen position) are of the order of 0.1° or less, sheeting of commercial interest have a range of transparency of about 10 to 90?% as measured by this test. Results obtained by the use of this test method are greatly influenced by the design parameters of the instruments; for example, the resolution is largely determined by the angular width of the receptor aperture. Caution should therefore be exercised in comparing results obtained from different instruments, especially for samples with low regular transmittance.

　　发布日期：2015-04-01

　　实施日期：2015-04-01

　　标准组织：美国试验与材料协会标准(ASTM)

　　ICS分类号：(83.140.10)薄膜和薄板

　　中国标准分类号：(G33)塑料型材

　　同一中标分类下的其他标准

　　• ASTM C578-2014a硬质泡沫聚苯乙烯隔热材料规格

　　• ASTM C582-2009耐蚀设备用接触模塑增强热固塑料层压材料的规格

　　• ASTM C1409-2008测量和评定绝缘管及部件数量的指南

　　• ASTM D706-2009醋酸纤维素模塑与挤压料规格

　　• ASTM D707-2009醋酸丁酸纤维素模制与挤压料规格

　　• ASTM C1349-2010建筑用平板玻璃包层聚碳酸酯规格

　　• ASTM C1349-2017

　　• ASTM D882-2010塑料薄板材抗拉特性试验方法

　　• ASTM D882-2012